[Bug]: 0.14.0 Release Candidate 2 UI Detect / Recording / Snapshot icons and preview recordings #12779

derhappy · 2024-08-06T07:34:17Z

derhappy
Aug 6, 2024

Describe the problem you are having

I'm currently running 0.14.0 Release Candidate 2 with four cameras. First of all: Wow, thank you so much for the huge leap forward in the UI!
I've been noticing two issues:
a) When recording, detection and snapshots are disabled for a camera through the HA integration the icons in the new frontend still show those options as active. When I disable them in the new frontend, close the browser tab and open it up again the icons are enabled again (detection / events are still disabled).
b) When recordings are disabled the low res preview stream is still recorded, so recording is not really disabled. Is this by design? It could be a privacy issue for some (and I guess my wife would also disapprove of the indoor cam recording the whole day, which is even worse than the legal issues).

Steps to reproduce

Disable recording / detection / snapshots via the HA integration switches and go to the new frontend.

Version

0.14.0-da913d8

Frigate config file

(abbreviated)
ffmpeg:
  global_args: -hide_banner -loglevel warning
  hwaccel_args: preset-vaapi
  input_args: -avoid_negative_ts make_zero -fflags +genpts+discardcorrupt -rtsp_transport
    tcp -timeout 5000000 -use_wallclock_as_timestamps 1

go2rtc:
  streams:
    gartenseite:
      - rtsp://[email protected]:554/Streaming/Channels/101/
    gartenseite_sub:
      - rtsp://[email protected]:554/Streaming/Channels/102/
    gartenende:
      - ffmpeg:gartenseite#video=h264#raw=-vf crop=1280:720:2580:0
    eingang:
      - rtsp://[email protected]/axis-media/media.amp?streamprofile=full264&camera=2
    eingang_sub:
      - rtsp://[email protected]/axis-media/media.amp?streamprofile=detect&camera=2
    klingel_ipad:
      - rtsp://[email protected]/axis-media/media.amp?camera=3
    innen:
      - rtsp://[email protected]:88/videoMain
mqtt:
  host: 192.168.1.222
  user: ...
  password: ...

cameras:
  garage:
    ffmpeg:
      inputs:
        - path: rtsp://user:[email protected]:554/Streaming/Channels/101/
          roles:
            - detect
            - record
    detect:
      width: 2304
      height: 1296
      fps: 5
      stationary:
      # Optional: Frequency for confirming stationary objects (default: shown below)
      # When set to 0, object detection will not confirm stationary objects until movement is detected.
      # If set to 10, object detection will run to confirm the object still exists on every 10th frame.
        interval: 10
        max_frames:
          objects:
            person: 300
    motion:
      mask:
        - 636,162,1833,278,2053,381,2131,0,0,0,0,535,350,291,451,272
    zones:
      rasen:
        coordinates: 2092,415,1866,273,819,182,563,314,1517,473,2059,529
      einfahrt:
        coordinates: 540,1296,1878,1296,2062,527,1515,471,613,291,89,657
    objects:
      track:
        - person
        - car
        - cat
        - dog
        - bear
      filters:
        bear:
          mask:
            - 2304,1296,2304,0,2071,0,2099,1296
            - 2137,0,0,0,0,172,2135,200
            - 0,448,0,1296,412,1296
            - 938,0,0,0,0,564
        car:
          mask:
            - 2304,1296,2304,0,2071,0,2099,1296
            - 0,1296,0,411,564,1296,316,1296
            - 1568,259,1898,601,1680,1296,742,1296,167,705,219,610,745,161
        cat:
          mask:
            - 2304,1296,2304,0,2071,0,2099,1296
            - 2137,0,0,0,0,172,2135,200
            - 0,448,0,1296,412,1296
            - 938,0,0,0,0,564
        dog:
          mask:
            - 2304,1296,2304,0,2071,0,2099,1296
            - 2137,0,0,0,0,172,2135,200
            - 0,448,0,1296,412,1296
            - 938,0,0,0,0,564
        person:
          min_area: 10000
          mask:
            - 526,296,587,79,764,0,0,0,0,581,74,581
    mqtt:
      enabled: true
      timestamp: false
      bounding_box: false
      crop: true
      height: 500
      quality: 100

    review:
      alerts:
        required_zones:
          - einfahrt
          - rasen

    mqtt:
      enabled: true
      timestamp: false
      bounding_box: false
      crop: true
      height: 500
      quality: 98

  innen:
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/innen
          roles:
            - detect
            - record
    detect:
      width: 1280
      height: 720
      fps: 5
    zones:
      innen_all:
        coordinates: 0,0,1280,0,1280,720,0,720
    objects:
      track:
        - person
      filters:
        person:
          min_area: 5000
    mqtt:
      enabled: true
      timestamp: false
      bounding_box: false
      crop: true
      height: 500
      quality: 90
    onvif:
      host: 192.168.1.36
      port: 888
      user: ...
      password: ...
    ui:
      order: 5

    motion:
      mask:
        - 0,0,233,0,235,32,0,30

  eingang:
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/eingang
          input_args: preset-rtsp-restream
          roles:
            - record
        - path: rtsp://127.0.0.1:8554/eingang_sub
          input_args: preset-rtsp-restream
          roles:
            - detect
    detect:
      width: 1920
      height: 1080
      fps: 5
      stationary:
        interval: 50
        max_frames:
          objects:
            person: 300
    zones:
      treppe:
        coordinates: 1502,534,788,650,642,840,1461,925
      einfahrt:
        coordinates: 1462,129,1152,166,979,396,1461,310
      klingel:
        coordinates: 1117,373,1560,175,1467,953,889,883
        objects:
          - person
      eingang_ext:
        coordinates: 1556,1080,1535,46,1155,98,385,1080
      eingang_all:
        coordinates: 1514,1080,1456,0,1063,0,0,984,0,1080
        objects:
          - car
          - cat
          - bear
    objects:
      track:
        - person
        - car
        - cat
        - dog
        - bear
      mask:
        - 826,0,0,0,0,652
      filters:
        bear:
          mask:
            - 1920,1080,1920,0,1487,0,1511,446,1515,1080
        car:
          mask:
            - 1920,1080,1920,0,1462,0,1485,321,1018,402,495,1080
            - 1268,74,1458,0,1471,246,1279,251
        cat:
          mask:
            - 1920,1080,1920,0,1487,0,1511,446,1515,1080
            - 950,657,776,635,948,407,1051,392
        dog:
          mask:
            - 1920,1080,1920,0,1487,0,1511,446,1515,1080
            - 960,671,994,462,895,482,847,560,791,654
        person:
          mask:
            - 1053,169,1168,115,1182,0,0,0,0,1080,135,1080
    motion:
      mask:
        - 0,0,0.508,0,0.224,0.481,0,0.77
        - 0.316,0.809,0.293,0.856,0.311,0.887,0.341,0.904,0.364,0.895,0.383,0.83,0.372,0.806,0.342,0.776
        - 1,1,0.848,1,0.851,0,1,0
        - 0.236,1,0,0.837,0,1
        - 0.629,1,0.636,0.844,0.499,0.799,0.442,1
        - 0.51,0.55,0.521,0.368,0.578,0.263,0.684,0.237,0.713,0.377,0.69,0.55,0.597,0.556
        - 0.084,1,0.015,0.917,0,0.768,0.055,0.671,0.068,0.775,0.081,0.837,0.096,0.727,0.13,0.735,0.132,0.798,0.15,0.81,0.153,0.839,0.192,0.845,0.224,0.862,0.228,0.931,0.255,1
        - 0.378,1,0.355,0.931,0.28,0.94,0.269,1
      threshold: 30
      contour_area: 15
      improve_contrast: 'true'
    mqtt:
      enabled: true
      timestamp: false
      bounding_box: false
      crop: true
      height: 500
      quality: 100

    review:
      alerts:
        required_zones:
          - einfahrt
          - treppe
          - klingel
detectors:
  coral:
    type: edgetpu
    device: usb


record:
  enabled: true
  retain:
    days: 2
    mode: all
  events:
    pre_capture: 5
    post_capture: 5
    retain:
      default: 8
      objects:
        person: 15
snapshots:
  enabled: true
  bounding_box: true
  crop: true
  clean_copy: true
  retain:
    default: 8


database:
  path: /db/frigate.db

# Optional: birdseye configuration
birdseye:
  enabled: false
  width: 800
  height: 600
  quality: 20
  mode: continuous

telemetry:
  version_check: false

version: 0.14

Relevant log output

2024-08-06 04:40:15.241827867  [2024-08-06 04:40:15] frigate.comms.dispatcher       INFO    : Turning off detection for innen
2024-08-06 04:40:15.285824845  [2024-08-06 04:40:15] frigate.comms.dispatcher       INFO    : Turning off recordings for innen
2024-08-06 04:40:15.286045145  [2024-08-06 04:40:15] frigate.comms.dispatcher       INFO    : Turning off snapshots for innen
2024-08-06 06:42:09.500890444  [2024-08-06 06:42:09] frigate.api.media              ERROR   : No recordings found for innen during the requested time range

Operating system

Other Linux

Install method

Docker Compose

Network connection

Wired

Camera make and model

various

Any other information that may be helpful

The log shows recording etc. have been disabled by the integration as expected.
The last log line was created when i scrubbed through the preview recording of the disabled camera

Answered by NickM-27

Aug 6, 2024

thanks, I was able to reproduce it intermittently, fixed in #12787

View full answer

NickM-27 · 2024-08-06T12:32:48Z

NickM-27
Aug 6, 2024
Collaborator Sponsor

I'm not able to reproduce this, how are you accessing Frigate?

8 replies

NickM-27 Aug 6, 2024
Collaborator Sponsor

you may want to verify that the websockets are working correctly for the proxy. Though if it didn't work without the proxy then not sure as I don't see any issues.

NickM-27 Aug 6, 2024
Collaborator Sponsor

can you provide step by step instructions to reproduce?

derhappy Aug 6, 2024
Author

turn off recording / detection / snapshots for one camera via the switch entities provided by the HA integration (via automation as soon as you wake up)
access the frigate UI and click on the camera to see the live view and toggle icons (or directly open the live view of the specific camera, does not matter)

It's the same behaviour for my other cameras. If I disable the functions via the new UI it works as expected, I see entries in the logs and the icons stay disabled on refresh. It's only displayed wrong when the functions are disabled via the HA integration.

NickM-27 Aug 6, 2024
Collaborator Sponsor

thanks, I was able to reproduce it intermittently, fixed in #12787

Answer selected by derhappy

derhappy Aug 6, 2024
Author

Thanks a lot @NickM-27!
Any thoughts about the second issue (recording low res preview stream even when recoding is disabled)?

NickM-27 Aug 6, 2024
Collaborator Sponsor

That is working as expected currently. If no recordings exist then on the next recording cleanup the preview will be deleted

derhappy Aug 6, 2024
Author

Thanks, thats fine for me but I expect some privacy issues might be raised about this behaviour. A function to totally disable all recordings would avert any thoughts in this direction.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[Bug]: 0.14.0 Release Candidate 2 UI Detect / Recording / Snapshot icons and preview recordings #12779

{{title}}

Replies: 1 comment 8 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

[Bug]: 0.14.0 Release Candidate 2 UI Detect / Recording / Snapshot icons and preview recordings #12779

derhappy Aug 6, 2024

Describe the problem you are having

Steps to reproduce

Version

Frigate config file

Relevant log output

Operating system

Install method

Network connection

Camera make and model

Any other information that may be helpful

Replies: 1 comment · 8 replies

NickM-27 Aug 6, 2024 Collaborator Sponsor

NickM-27 Aug 6, 2024 Collaborator Sponsor

NickM-27 Aug 6, 2024 Collaborator Sponsor

derhappy Aug 6, 2024 Author

NickM-27 Aug 6, 2024 Collaborator Sponsor

derhappy Aug 6, 2024 Author

NickM-27 Aug 6, 2024 Collaborator Sponsor

derhappy Aug 6, 2024 Author

derhappy
Aug 6, 2024

Replies: 1 comment 8 replies

NickM-27
Aug 6, 2024
Collaborator Sponsor

NickM-27 Aug 6, 2024
Collaborator Sponsor

NickM-27 Aug 6, 2024
Collaborator Sponsor

derhappy Aug 6, 2024
Author

NickM-27 Aug 6, 2024
Collaborator Sponsor

derhappy Aug 6, 2024
Author

NickM-27 Aug 6, 2024
Collaborator Sponsor

derhappy Aug 6, 2024
Author