Sending JK BMS PB-x firmware update command via BLE

[tarek-zy]

I have a JK BMS (PB-2A16S15P - HW: 15.XA, SW: 15.10) with a faulty RS485-1 (right besides CAN port), which makes me unable to update my BMS firmware or even connect it to my inverter, as there is no communication possible via that port at all, so I had to do a lot of tests and sniffed all communication possible.

When I try to update the firmware via RS485-2 ports that are designated for parallel connection with other JK BMS units, the BMS shuts down / crashes immediately. I, with other few owners worldwide, have this fatal bug, and despite several attempts to contact JK support and other popular YouTube influencers, we are out of luck so far.

A creative solution would be converting the RS485 command to a Bluetooth command to make it possible to be executed via BLE.
Can any one help on converting the following command?
RS485-1 Firmware update command (HEX):
01 10 16 26 00 01 02 00 00 D6 97