v1.3.0

It has been more then two years since last release. This new release packs lots of small improvements on both the codebase and the documentation. The most important feature is without a doubt the MQTT discovery functionality for which we have @meijer3 to thank for, awesome job! In addition there are new RS485 device supported: Duco ventilation and Esera 1-Wire gateway are now supported making a solid entrance in the HVAC area. Expect more to come!

Enjoy!

🚀 Features

• OUTPUT Bistable & Binary: Invert functionality + corrected cover Eltako wiring diagrams @MichielVanwelsenaere (#143)
• Mqtt Discovery refactor @MichielVanwelsenaere (#140)
• FB_INPUT_BINARYSENSOR_MQTT: supporting MQTT discovery @MichielVanwelsenaere (#138)
• FB_RS485_DUCO_DUCOBOX @MichielVanwelsenaere (#135)
• HA Discovery and DMX Dimmers @meijer3 (#131)
• FB_RS485_EASTRON_SDM_POWER_MQTT: Adding support for SDM120 @MichielVanwelsenaere (#127)
• Adopting MQTT topic structure approach @MichielVanwelsenaere (#122)
• MQTT Discovery Improvements @MichielVanwelsenaere (#142)
• RS485 devices: individual device availability topic @MichielVanwelsenaere (#120)
• Esera 1-Wire gateway: Supporting DS18B20 temperature sensor @MichielVanwelsenaere (#118)
• implemented FB_RS485_ESERA_1WIRE_GATEWAY_MQTT @MichielVanwelsenaere (#108)
• RS485 refactor + FB_RS485_EASTRON_SDM_POWER_MQTT @MichielVanwelsenaere (#102)
• Update to support CodeSys 3.5 SP16 @sf-prime (#99)

🐛 Bug Fixes

• Multiple fixes on MQTT discovery @MichielVanwelsenaere (#139)
• FB_OUTPUT_COVER_MQTT: replacing implementation to a more stable one @MichielVanwelsenaere (#137)
• updated binary sensor to publish state upon startup @MichielVanwelsenaere (#100)

📖 Documentation

• Finetuning docs, incorperating MQTT Discovery badge @MichielVanwelsenaere (#136)
• Adding list of supported 1-wire devices @MichielVanwelsenaere (#130)
• Updating MQTT samples to new approach in HA @MichielVanwelsenaere (#126)
• Adding warning in docs for unreliable EASTRON SDM Kwh measurements @MichielVanwelsenaere (#119)
• FB_VIRTUAL_BOOL_MQTT: fix faulty state topic in docs @MichielVanwelsenaere (#117)
• Adding wiring diagram for cover setup with Eltako's @MichielVanwelsenaere (#109)
• minor update to cover wiring docs @MichielVanwelsenaere (#106)
• HA Samples: creating energy sensor from power sensor @MichielVanwelsenaere (#105)
• Update FB_INPUT_BINARYSENSOR_MQTT.md @Dippely (#103)
• correcting RS485 wiring diagram for Eastron SDM220 @MichielVanwelsenaere (#91)
• adding RS485 cabling best practices @MichielVanwelsenaere (#86)
• adding suggestion in docs on how to wire cover motors @MichielVanwelsenaere (#83)

🏁 Project Governance

• skip dead link check for some links @MichielVanwelsenaere (#101)