Skip to content

JSON Pointer (RFC 6901) and numeric JSON equivalence for Jackson (2.2.x)

License

Notifications You must be signed in to change notification settings

aerofish/jackson-coreutils

 
 

Repository files navigation

Read me first

This project, as of version 1.5, is licensed under both LGPLv3 and ASL 2.0. See file LICENSE for more details. Versions 1.0 and lower are licensed under LGPLv3 only.

This project uses Gradle as a build system. See file BUILD.md for details.

Credits where they are due: other people have contributed to this project, and this project would not have reached its current state without them. Please refer to the CONTRIBUTORS.md file in this project for details.

What this is

This package is meant to be used with Jackson 2.2.x. It provides the three following features:

  • write/read JSON decimal numbers using BigDecimal (instead of double) for optimal numeric precision;
  • (since 1.6) preconfigured JSON reader with trailing data detection support (see below);
  • JSON numeric equivalence;
  • JSON Pointer support.

Versions

The current verson is 1.8. Its Javadoc is available online.

Please see file RELEASE-NOTES.md for more information.

Using in Gradle/Maven

With Gradle:

dependencies {
    compile(group: "com.github.fge", name: "jackson-coreutils", version: "1.8");
}

With Maven:

<dependency>
    <groupId>com.github.fge</groupId>
    <artifactId>jackson-coreutils</artifactId>
    <version>1.8</version>
</dependency>

Description

BigDecimal to read decimal values (instead of double)

All classes in this package whose purpose is to load JSON data (JsonLoader, Jackson mappers provided by JacksonUtils, and JsonLoader since version 1.6) will deserialize all decimal instances using BigDecimal (more appropriately, Jackson's DecimalNode). This allows to retain the numeric value with full precision and not be a victim of IEEE 754's limitations in this regard.

Trailing data detection (since 1.6)

Jackson's default JSON deserialization, when reading an input such as this:

[]]

will read the initial value ([]) and stop there, ignoring the trailing ]. This behaviour can be beneficial in the event that you have a "streaming" JSON source, however it is not suitable if you know you have only one JSON value to read and want to report an error if trailing data is detected.

This package provides a JsonNodeReader class which will fail with an exception on trailing input.

JSON numeric equivalence

When reading JSON into a JsonNode, Jackson will serialize 1 as an IntNode but 1.0 as a DoubleNode (or a DecimalNode).

Understandably so, Jackson will not consider such nodes to be equal, since they are not of the same class. But, understandably so as well, some uses of JSON out there, including JSON Schema and JSON Patch's test operation, want to consider such nodes as equal.

This package provides an implementation of Guava's Equivalence which considers that two numeric JSON values are equal if their value is mathematically equal -- recursively so. That is, JSON values 1 and 1.0 will be considered equivalent; but so will be all possible JSON representations of mathematical value 1 (including, for instance, 10e-1). And evaluation is recursive, which means that:

[ 1, 2, 3 ]

will be considered equivalent to:

[ 10e-1, 2.0, 0.3e1 ]

JSON Pointer

JSON Pointer is an IETF RFC (6901) which allows to unambiguously address any value into a JSON document (including the document itself, with the empty pointer). It is used in several IETF drafts and/or RFCs:

The implementation in this package applies to all TreeNodes as of Jackson 2.2.x; this includes JsonNode.

Usage

Read JSON using BigDecimal for decimal numbers

Several options are available:

// JsonLoader
final JsonNode node = JsonLoader.fromFile(new File("whatever.json"));
final JsonNode node = JsonLoader.fromResource("/in/class/path/my.json");
// Get a preconfigured ObjectMapper or reader with BigDecimal deserialization
final ObjectMapper mapper = JacksonUtils.newMapper();
final ObjectReader reader = JacksonUtils.getReader();
// Get a JsonNodeReader; see below
final JsonNodeReader reader = new JsonNodeReader();

Read JSON with trailing data detection support

The class to use is JsonNodeReader:

// Default reader, no additional options
final JsonNodeReader reader = new JsonNodeReader();
// Provide a custom ObjectMapper
final ObjectMapper mapper = ...;
final JsonNodeReader reader = new JsonNodeReader(mapper);
// Read from an InputStream, a Reader
final JsonNode node = reader.fromInputStream(...);
final JsonNode node = reader.fromReader(...);

Note that the JsonLoader class uses a JsonNodeReader.

Numeric equivalence

Given two JsonNode instances which you want to be equivalent if their JSON number values are the same, you can use:

if (JsonNumEquals.getInstance().equivalent(node1, node2))
    // do something

You can also use this package to add JsonNode instances to a set:

final Equivalence<JsonNode> eq = JsonNumEquals.getInstance();
// Note: uses Guava's Sets to create the set
final Set<Equivalence.Wrapper<JsonNode>> set
    = Sets.newHashSet();

// Insert values
set.add(eq.wrap(node1));
set.add(eq.wrap(node2));
// etc

JSON Pointer

There are several ways you can build one:

// Build from an input string -- potentially throws JsonPointerException on malformed inputs
final JsonPointer ptr = new JsonPointer("/foo/bar");
// Build from a series of raw tokens -- never throws an exception
final JsonPointer ptr = JsonPointer.of("foo", "bar", 1); // Yields pointer "/foo/bar/1"
// Get another pointer's parent:
final JsonPointer parent = ptr.parent();

Note that JsonPointer is immutable:

// DON'T DO THAT: value of "ptr" will not change
ptr.append("foo");
// Do that instead
ptr = ptr.append("foo");

Then, to use it, use either the .get() or the .path() methods:

// "node" is a JsonNode
// .get() returns null if there is no such path
final JsonNode child = ptr.get(node);
// Test if a path exists with .path()
if (!ptr.path(node).isMissingNode())
    // do something

About

JSON Pointer (RFC 6901) and numeric JSON equivalence for Jackson (2.2.x)

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Java 91.1%
  • Groovy 8.7%
  • Shell 0.2%