sunxi-fw is a command line tool that allows to inspect and extract from
firmware images for Allwinner CPU based systems.
It can detect and decode several firmware components used in Allwinner firmware images:
- MBR or GPT partition tables
- mainline U-Boot SPL images, both in eGON and TOC0 format
- Allwinner BSP boot0 images
- mainline U-Boot legacy images
- mainline U-Boot FIT images
- Allwinner proprietary PhoenixSuite firmware images
$ ./sunxi-fw -h
usage: ./sunxi-fw <action> [-vah] [-n name] [-o outputfile] [inputfile]
info: print information about the image
extract -n <id>: extract part of image
dt-name: print name of board devicetree in SPL header
list-dt-names: list all DT names in FIT image
-o filename: output file name for extract
-v: more verbose output
-a: scan all of input file for parts
-h: this help screen
The info command without further options gives an overview, listing firmware
components and their names. Each component will be given an ID, followed by a
colon. The offsets at the beginning of a line are 512-byte sectors:
$ sunxi-fw info u-boot-sunxi-with-spl.bin
@ 0: spl: U-Boot SPLv2
DT: sun50i-a64-pine64-plus
@ 64: fit: U-Boot FIT image
fit:uboot: "U-Boot (64-bit)"
fit:atf: "ARM Trusted Firmware"
fit:scp: "SCP firmware"
fit:fdt-1: "sun50i-a64-pine64"
fit:fdt-2: "sun50i-a64-pine64-plus"
configuration: sun50i-a64-pine64
configuration: sun50i-a64-pine64-plus
Adding -v to the info command gives more output:
$ sunxi-fw info -v u-boot-sunxi-with-spl.bin
@ 0: spl: U-Boot SPLv2
DT: suniv-f1c200s-lctech-pi
size: 24576 bytes
eGON checksum matches: 0x323f3a85
U-Boot SPL 2024.01-rc2 (Nov 21 2023 - 16:58:04 +0000)
@ 64: u-boot.img: U-Boot legacy image
size: 361092 bytes
OS: U-Boot
arch: ARM
type: Firmware
comp: 0
u-boot: name: U-Boot 2024.01-rc2 for sunxi boa
The extract command can save any firmware component that was given a name:
$ sunxi-fw extract -n fit:fdt-1 -o device.dtb u-boot-sunxi-with-spl.bin
$ file device.dtb
device.dtb: Device Tree Blob version 17, size=39744, boot CPU=0, string block size=3149, DT structure block size=36532
The input file can be any regular file, a device file like /dev/sdb, or even
the output of a UNIX pipe:
$ 7z e -so some_dodgy_BSP_based_vendor.img.7z | sunxi-fw info -v
@ 0: wty: PhoenixSuite image file
header v3.0, 45 images, 1924 MB
wty:sys_config.fex : 35838 bytes @ +0x0000b800
wty:board.fex : 1024 bytes @ +0x00014400
wty:config.fex : 53248 bytes @ +0x00014800
wty:split_xxxx.fex : 512 bytes @ +0x00021800
wty:sys_partition.fex : 5601 bytes @ +0x00021c00
wty:sunxi.fex : 72192 bytes @ +0x00023400
wty:boot0_nand.fex : 61440 bytes @ +0x00035000
wty:boot0_sdcard.fex : 61440 bytes @ +0x00044000
wty:u-boot.fex : 917504 bytes @ +0x00053000
...
wty:Vvbmeta_vendor.fex : 4 bytes @ +0x7825bc00
wty:dtbo.fex : 2097152 bytes @ +0x7825c000
wty:Vdtbo.fex : 4 bytes @ +0x7845c000
@ 544: boot0: Allwinner boot0
size: 61440 bytes
eGON checksum matches: 0x4d570301
DRAM parameters: A64 H616
DRAM clock : 0x288 0x288 -
DRAM type : 0x3 0x3 -
ZQ value : 0x3030303 - -
ODT enabled : 0xe0e0e0e 0x1 -
DX ODT : - 0x3030303 -
DX DRI : - 0xe0e0e0e -
CA DRI : - 0x1f12 -
PARA1 : 0x1f12 0x30fb -
PARA2 : 0x1 0 -
MR0 : 0x30fb 0x840 -
MR1 : 0 0x4 -
MR2 : 0x840 0x8 -
MR3 : 0x4 0 -
TPR0 : 0x8 0xc0001002 -
TPR6 : 0 0x33808080 -
TRP10 : 0 0x2f1107 -
TRP11 : 0 0xddddcccc -
TRP12 : 0xc0001002 0xeddc7665 -
TRP13 : 0 0x40 -
