Skip to content

glyn/webfinger-rs

Repository files navigation

webfinger-rs

webfinger-rs is a simple WebFinger server, written in Rust.

The server can support multiple WebFinger resources, but is intended for use with a small, relatively static number of such resources, for example on a personal website. The server is not intended for sites with many users, since the mappings from WebFinger resource to JSON Resource Descriptor (JRD) are stored in a single file.

WebFinger must be served over HTTPS, but this server currently supports only HTTP, so this server must sit behind a HTTPS server. For example, this server could be used in conjunction with a reverse proxy, such as NGINX or freenginx, that terminates HTTPS traffic from clients and then passes requests to this server.

Requests and responses

Requests must contain the path component /.well-known/webfinger. Any other path component will result in HTTP 404 (Not Found).

Requests must contain a query component with exactly one resource parameter set to the value of the URI of the WebFinger resource being queried. If the resource parameter is absent, malformed, or if there is more than one resource parameter, this will result in HTTP 400 (Bad Request). If the resource parameter does not correspond to a known WebFinger resource, this will result in HTTP 404 (Not Found).

The query component of a request may contain one or more rel parameters. These are used to request a subset of the JRD for the WebFinger resource: only the links in the JRD with relation types matching the value of one of the rel parameters are returned. If no rel parameter is provided, all links in the JRD are returned.

Each parameter value in the request is percent-encoded as described in section 4.1 of RFC 7033.

Any parameters of the query component other than resource and rel are ignored.

A successful response is indicated by HTTP 200 (OK) and includes the HTTP headers Access-Control-Allow-Origin: * and Content-Type: application/jrd+json. The response body consists of the JRD, or a subset of the JRD if the request included rel parameters.

Usage

Start the webfinger-rs server by executing the following command:

webfinger-rs --port <portnum> --jrd-map-path /path/to/jrdmap.json

where <portnum> is the port the server should listen on and --jrd-map-path is the file path of a JSON file containing a map from string URI to the JSON Resource Descriptor (JRD) associated with the URI.

For example:

{ "acct:[email protected]": {
    "subject": "acct:[email protected]",
    "aliases": [
      "acct:[email protected]"
    ],
    "links": [
      {
        "rel": "http://webfinger.net/rel/avatar",
        "type": "image/jpeg",
        "href": "https://example.com/alice-avatar.jpeg"
      }
    ]
  },
  "acct:[email protected]": {
    "subject": "acct:[email protected]",
    "aliases": [
      "acct:[email protected]"
    ],
    "links": [
      {
        "rel": "self",
        "type": "application/activity+json",
        "href": "https://example.com/users/bob"
      }
    ]
  }
}

In the example, each URI in the top-level map is an account equal to the subject, but the URIs need not be accounts and need not be equal to the subject. See the WebFinger RFC 7033 for more information about URIs and subjects and RFC 7565 for details of the 'acct' URI scheme.

Ideally, run the webfinger-rs server under a separate user (e.g. webfinger) created with no home directory, shell, or password. For example, you can create such a user in Debian as follows:

# adduser --system webfinger

Trying it out

Run the server with port 8095 (or any other suitable port) and the example JRD map above:

webfinger-rs --port 8095 --jrd-map-path example.json

Then issue a WebFinger request using curl and see the response:

curl -i -H 'Accept: application/jrd+json' http://localhost:8095/.well-known/webfinger\?resource\=acct:[email protected]
HTTP/1.1 200 OK
content-type: application/jrd+json
access-control-allow-origin: *
content-length: 194
date: Fri, 28 Jun 2024 11:33:51 GMT

{"subject":"acct:[email protected]","aliases":["acct:[email protected]"],"links":[{"rel":"http://webfinger.net/rel/avatar","type":"image/jpeg","href":"https://example.com/alice-avatar.jpeg"}]}

(the -i switch displays the response headers)

Building

Binary builds for Linux and Windows are available in published releases. However, if you need to build for a different platform or with a pre-release level of code, please read on.

This server is written in Rust. After installing Rust, build the server by issuing the cargo command in the root directory of a clone of this repository:

cargo build --release

This will build the webfinger-rs server executable in target/release.

Development

See the Contributor Guide if you'd like to submit changes or you need to create a release.