Skip to content

Include connectors by default again #88

Include connectors by default again

Include connectors by default again #88

name: Export Electronics (v2)
on:
push:
pull_request:
jobs:
export-electronics-sensor-smd:
name: Export Electronics (Sensor SMD)
runs-on: ubuntu-20.04
steps:
- name: Checkout code
uses: actions/checkout@v2
- name: Set up outputs directory
run: mkdir -p electronics/build/outputs
- name: Install dependencies
run: ./electronics/scripts/dependencies_v2.sh
# Sensor board:
- name: Export PCB fabrication files [sensor_smd, single]
run: |
./electronics/scripts/export_jlcpcb.py electronics/sensor_smd/sensor_smd.kicad_pcb --assembly-schematic electronics/sensor_smd/sensor_smd.kicad_sch
cp -r electronics/build/sensor_smd-jlc electronics/build/outputs/sensor_smd-jlc
- name: Panelize sensor PCB
run: |
kikit panelize -p electronics/sensor_smd/kikit_panelize.json electronics/sensor_smd/sensor_smd.kicad_pcb electronics/build/panelized_sensor_smd.kicad_pcb
- name: Export PCB fabrication files [sensor_smd, panelized]
run: |
./electronics/scripts/export_jlcpcb.py electronics/build/panelized_sensor_smd.kicad_pcb --assembly-schematic electronics/sensor_smd/sensor_smd.kicad_sch
cp -r electronics/build/panelized_sensor_smd-jlc electronics/build/outputs/sensor_smd-panelized-jlc
# Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
- name: Exports [sensor_smd, single]
uses: INTI-CMNB/KiBot@v2_k6_1_6_3
with:
config: electronics/sensor_smd/sensor_smd.kibot.yml
dir: electronics/build/outputs
schema: 'electronics/sensor_smd/sensor_smd.kicad_sch'
board: 'electronics/sensor_smd/sensor_smd.kicad_pcb'
- name: Exports [sensor_smd, panelized]
uses: INTI-CMNB/KiBot@v2_k6_1_6_3
with:
config: electronics/sensor_smd/sensor_smd-panelized.kibot.yml
dir: electronics/build/outputs
schema: 'electronics/sensor_smd/sensor_smd.kicad_sch'
board: 'electronics/build/panelized_sensor_smd.kicad_pcb'
- name: Fix permissions
# Need to chown files back to runner, as ownership gets set to root by the KiBot Actions
run: |
sudo chown runner:docker electronics/build/outputs/*
sudo chown runner:docker electronics/build/*
- name: Update 3D artifacts [sensor_smd, single]
run: |
mv electronics/build/outputs/sensor_smd-3D_top.png electronics/build/outputs/sensor_smd-front-3d.png
./scripts/annotate_image.sh electronics/build/outputs/sensor_smd-front-3d.png
mv electronics/build/outputs/sensor_smd-3D_bottom.png electronics/build/outputs/sensor_smd-back-3d.png
./scripts/annotate_image.sh electronics/build/outputs/sensor_smd-back-3d.png
env:
PYTHONUNBUFFERED: 1
- name: Update 3D artifacts [sensor_smd, panelized]
run: |
mv electronics/build/outputs/panelized_sensor_smd-3D_top.png electronics/build/outputs/panelized_sensor_smd-front-3d.png
./scripts/annotate_image.sh electronics/build/outputs/panelized_sensor_smd-front-3d.png
mv electronics/build/outputs/panelized_sensor_smd-3D_bottom.png electronics/build/outputs/panelized_sensor_smd-back-3d.png
./scripts/annotate_image.sh electronics/build/outputs/panelized_sensor_smd-back-3d.png
env:
PYTHONUNBUFFERED: 1
- name: Rasterise schematic [sensor_smd]
run: |
convert -density 96 electronics/build/outputs/sensor_smd-schematic.pdf -background white -alpha remove electronics/build/outputs/sensor_smd-schematic.png
./scripts/annotate_image.sh electronics/build/outputs/sensor_smd-schematic.png
- name: Show artifacts
if: always()
run: |
ls -lah electronics/build
ls -lah electronics/build/outputs
- name: Archive artifacts
uses: actions/upload-artifact@v4
if: always()
with:
name: electronics-v2
path: |
electronics/build
- name: Configure AWS Credentials
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
uses: aws-actions/configure-aws-credentials@v1
with:
aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
aws-region: us-east-1
- name: Sync artifacts to S3
if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
run: |
aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-v2 --delete --acl public-read --cache-control max-age=0,no-cache