Skip to content

How to debug Spyder deadlock freeze hang

Joseph Martinot-Lagarde edited this page Jun 21, 2016 · 1 revision

While developing Spyder it may happen that it freezes or hangs for some reason. Spyder is a multithreaded application, and has the ability to execute and control things in a separate process. Spyder communicates with other threads/processes using network sockets (bsdsocket.py), and if communication fails for some reason, it may enter an endless loop waiting for the input.

Here is an example session with gdb on Fedora Linux how to see what Spyder threads are doing during deadlock. Gdb on Fedora 16+ contains Python tools that may not be present on other systems. This assumes that you've executed Spyder with gdb. For development, it is convenient to run Spyder directly from source:

gdb -ex r --args python bootstrap.py

Do whatever you do in Spyder to cause a deadlock, switch to gdb and interrupt the process with Ctrl-C.

^C
Program received signal SIGINT, Interrupt.
0xb7fff424 in __kernel_vsyscall ()
(gdb)

Now inspect threads and look what do they do:

(gdb) info threads
  Id   Target Id         Frame 
  29   Thread 0xa72fab40 (LWP 22636) "python" 0xb7fff424 in __kernel_vsyscall ()
  28   Thread 0xa7afbb40 (LWP 22635) "python" 0xb7fff424 in __kernel_vsyscall ()
  27   Thread 0xa82fcb40 (LWP 22634) "python" 0xb7fff424 in __kernel_vsyscall ()
  26   Thread 0xa8afdb40 (LWP 22633) "python" 0xb7fff424 in __kernel_vsyscall ()
  25   Thread 0xa92feb40 (LWP 22632) "python" 0xb7fff424 in __kernel_vsyscall ()
  24   Thread 0xa9affb40 (LWP 22631) "python" 0xb7fff424 in __kernel_vsyscall ()
  21   Thread 0xab036b40 (LWP 22628) "python" 0xb7fff424 in __kernel_vsyscall ()
  20   Thread 0xaa6ffb40 (LWP 22627) "python" 0xb7fff424 in __kernel_vsyscall ()
  3    Thread 0xabe18b40 (LWP 22610) "python" 0xb7fff424 in __kernel_vsyscall ()
  2    Thread 0xac741b40 (LWP 22609) "python" 0xb7fff424 in __kernel_vsyscall ()
* 1    Thread 0xb7fdf6c0 (LWP 22605) "python" 0xb7fff424 in __kernel_vsyscall ()
(gdb) py-list
 109    # See solution (1) in Issue 434:
 110    # http://code.google.com/p/spyderlib/issues/detail?id=434#c13
 111    def communicate(sock, command, settings=[]):
 112        """Communicate with monitor"""
 113        try:
>114            COMMUNICATE_LOCK.acquire()
 115            write_packet(sock, command)
 116            for option in settings:
 117                write_packet(sock, option)
 118            return read_packet(sock)
 119        finally:
(gdb) thread 29
[Switching to thread 29 (Thread 0xa72fab40 (LWP 22636))]
#0  0xb7fff424 in __kernel_vsyscall ()
(gdb) py-list
Unable to locate python frame
(gdb) thread 28
[Switching to thread 28 (Thread 0xa7afbb40 (LWP 22635))]
#0  0xb7fff424 in __kernel_vsyscall ()
(gdb) py-list
 197            for method in _delegate_methods:
 198                setattr(self, method, dummy)
 199        close.__doc__ = _realsocket.close.__doc__
 200    
 201        def accept(self):
>202            sock, addr = self._sock.accept()
 203            return _socketobject(_sock=sock), addr
 204        accept.__doc__ = _realsocket.accept.__doc__
 205    
 206        def dup(self):
 207            """dup() -> socket object
(gdb)

Do this for all threads to get a picture of what's going on. There is a shortcut for it:

(gdb) t a a py-list

Which means thread apply all py-list.

In my case there was a blocking read on a socket in Thread 27:

(gdb) thread 27
[Switching to thread 27 (Thread 0xa82fcb40 (LWP 22634))]
#0  0xb7fff424 in __kernel_vsyscall ()
(gdb) py-list
  69            prefix = "R%02d.%02d" % (sock.fileno(), read_counter)
  70            logfile.write("%s " % (prefix))
  71        sock.settimeout(timeout)
  72        dlen, data = None, None
  73        try:
 >74            datalen = sock.recv(SZ)
  75            if DEBUG:
  76                logfile.write("len(len):%s\n" % (len(datalen)))
  77            dlen, = struct.unpack("l", datalen)
  78            if DEBUG:
  79                logfile.write("%s   (%s) " % (prefix, dlen))
(gdb)

You can then use py-up and py-down commands to walk through the stack in each thread, or use py-bt to dump the full (and a bit too verbose) stack trace.

Enjoy hacking.

P.S. If you know how to improve this technique, please, post a note to Spyder discussion group and add me ([email protected]) to CC. Thanks.

P.P.S. And thanks to Fedora hackers for awesome tools http://fedoraproject.org/wiki/Features/EasierPythonDebugging

Clone this wiki locally